DIY products

30cm*6cm*0.5cm

Features DIY Product make yourself to auto fill water in your tank Prevent below water level in your tank Very Easy to installation~ No any technical skill It's also can connect with your RO system if you need You can connect with different type of pastic bottle(Depends of you need for 1.25Litres or 2 Litres or 5 Litres bottles) Specification Air Tubling included Mount Included (19cm) Air Check Valve Included

the fish watch, very clearly watch your coral SPS HPS on water surface even open the wavermaker pump, it don't be affect by wave you can take photo through it

Unfortunately this combination is not accessible

High quality nylon to provides a pre filter for rocks, sand or tank waste Reduce fish drop into your sand tank or die Easy for clean or re-use, save our world Prefilter can avoid damage of skimmer for the sand or rocks drop into it

Make the job of tank cleaning or water changing much easier Fimly hold the hose, assure no slipping Compact in size and easy to fasten Apply to nearly all type of tanks

The soft tube fixture for dosing pump for 4 tube

The soft tube fixture for dosing pump for 6 tubes

The soft tube fixture for dosing pump for 4 tube

The Coral Feeder is the perfect tool for feeding foods to hard corals (SPS & LPS), soft corals, or small fish. it include 2 feeder: 1X40cm long and 1X60cm long

A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device. Description: Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or what ever your project may be Up float switch Contains no mercury Product Specification: Cable Length: 30.5(cm) Maximum Load: 50 W Max Switching Voltage: 100V DC Minimum Voltage: 250V DC Maximum Switching Current: 0.5 A Max Load Current: 1.0 A Max Contact Resistance: 0.4 Ω Temp Rating: -20~+80℃